This work reports a study of the fatigue behaviour and quasi-static strength of full-scale adhesively bonded steel-composite joints. Three joints with an approximately 10-mm-thick layer of methyl methacrylate adhesive were manufactured in dockyard conditions. One specimen was tensile tested till failure, while two specimens were subjected to ~3.5 million fatigue cycles, followed by a residual tensile test supported with digital image correlation. The shear, longitudinal and peel strain values within the adhesive bondlines are significantly higher at the gripped sides due to the asymmetrical design of the steel brackets. All specimens showed a significantly higher shear strength than the design values defined by the shipbuilder. Fibre Bragg sensors monitored strains at steel and composite constituents and allowed to detect damage onset and evolution in tensile tested specimens. A finite element model of the joint was developed with material and interface properties based on dedicated small-scale experiments. The simulation results of strains during a static load test corresponded closely to the DIC measurements. All specimens failed near the composite-adhesive interface due to delamination of the composite panel.","AbstractOtherLang":null,"BibLvlCode":"AS","StandardTitle":"Experimental and numerical analysis of strength and deformation of large-scale steel-composite adhesive joints subjected to fatigue followed by static loading","OrigTitleLangCode":"en","OrigTitleLangCodeExtended":"eng","OrigTitleLangID":15,"DateLastModified":{"date":"2024-12-10 01:33:17.368041","timezone_type":1,"timezone":"+01:00"},"UserAccessRight":null,"UserAccID":null,"AuthorKeywords":"digital image correlation; fibre optic sensor; finite element modelling; MMA adhesive; strain","OtherDescriptors":null,"Notes":null,"AnaPub":2024,"MonPub":null,"DateUpdate":"2024-02-26","DateCreate":"2024-02-16","SecASFANote":null,"ConfID":null,"PeerRev":1,"VlizCoreFlag":1,"WoScode":"WOS:001095851300001","VABBcode":null,"OpenAcc":0,"DOI":"10.1111/str.12468"},"refs":null,"anarec":{"AnaID":382773,"PubliDate":2024,"Pagination":"18","XtraPublOfAnaID":null,"ISBN":null,"Volume":"Early View","Issue":null,"BRefMon":null,"BRefMonRR":null,"BRefXtra":null,"BRefXtraRR":null,"SerBRefID":43836,"SerRR":"Strain. British Society for Strain Measurement: Swansea. ISSN 0039-2103; e-ISSN 1475-1305","StandardTitleSer":"Strain","ISSN":"0039-2103","AbbrevSer":"Strain","StandardTitleMon":null,"StartPage":18,"Pages":null,"ToPubliDate":null,"BRefBibLvlCode":"S","SerNotes":null},"monrec":null,"serrec":null,"relations":null,"relationsRev":null,"addrec":null,"othpubs":null,"ownerships":null,"authors":[{"AutName":"Jaiswal","Firstname":"Pankaj","Initials":"P.R.","Affiliation":"Soete Laboratory, Department of Electromechanical, Systems and Metal Engineering (EMSME), Ghent University","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":527811,"OrderNr":1,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":"Universiteit Gent; Faculteit Ingenieurswetenschappen; Vakgroep Mechanische Constructie en Productie; Laboratorium Soete","ORCID":"0000-0002-9373-4489","PersID":41088,"InsID":2243},{"AutName":"Kumar","Firstname":"Rahul Iyer","Initials":"R.I.","Affiliation":"Soete Laboratory, Department of Electromechanical, Systems and Metal Engineering (EMSME), Ghent University","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":554169,"OrderNr":2,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":"Universiteit Gent; Faculteit Ingenieurswetenschappen; Vakgroep Mechanische Constructie en Productie; Laboratorium Soete","ORCID":"0000-0003-1241-2697","PersID":41087,"InsID":2243},{"AutName":"Bormann","Firstname":"Franz","Initials":"F.","Affiliation":"Mat Innovat Inst M2i, Delft, Netherlands.","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":554170,"OrderNr":3,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":null,"ORCID":null,"PersID":null,"InsID":null},{"AutName":"Juwet","Firstname":"Thibault","Initials":"T.","Affiliation":"Com&Sens Bvba","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":527813,"OrderNr":4,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":null,"ORCID":null,"PersID":null,"InsID":null},{"AutName":"Luyckx","Firstname":"Geert","Initials":"G.","Affiliation":"Com&Sens Bvba","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":527814,"OrderNr":5,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":null,"ORCID":null,"PersID":null,"InsID":null},{"AutName":"Mouton","Firstname":"Luc","Initials":"L.","Affiliation":"Bur Veritas Marine & Offshore, Compos Mat Sect, Pessac, France.","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":554173,"OrderNr":6,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":null,"ORCID":null,"PersID":null,"InsID":null},{"AutName":"Verhaeghe","Firstname":"Cedric","Initials":"C.","Affiliation":"Damen Schelde Naval Shipbldg, Vlissingen, Netherlands.","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":554174,"OrderNr":7,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":null,"ORCID":null,"PersID":null,"InsID":null},{"AutName":"De Waele","Firstname":"Wim","Initials":"W.","Affiliation":"Soete Laboratory, Department of Electromechanical, Systems and Metal Engineering (EMSME), Ghent University","Discriminator":null,"CorporateFlag":0,"BEntID":380515,"AutID":527816,"OrderNr":8,"DegrID":null,"EditorFlag":0,"CorrespFlag":0,"IllustratorFlag":0,"ReviserFlag":0,"TranslatorFlag":0,"InsAcronym":null,"InsFSN":"Universiteit Gent; Faculteit Ingenieurswetenschappen; Vakgroep Mechanische Constructie en Productie; Laboratorium Soete","ORCID":"0000-0002-7196-3328","PersID":30605,"InsID":2243}],"mapdetails":null,"datasets":null,"monographs":null,"monparts":null,"serparts":null,"BEntOpen":null,"BEntPrivate":null,"availability":[{"BInstID":396627,"LibID":36,"BRefID":382773,"EmbargoDate":null,"FullEmbargoDate":null,"PhysMedID":16,"hasOCRd":1,"ShelfLocCode":"396627","RFID":null,"PaidValue":null,"Medium":"Server","Description":"Interne VLIZ documenten","Acronym":"VLIZ","Library":"Vlaams Instituut voor de Zee","DutchTerm":"Non-open access","URL":null,"ClassifID":228,"Classification":"Non-open access","ReqLink":1,"ClassifTypID":3,"URLLocation":"https://www.vliz.be/imisdocs/publications/","SubDir":1,"InternalReq":1,"LoggedInReq":1,"Disclaimer":"Disclaimer_VLIZ_Intern","DutchDisclaimer":"
Deze publicatie is enkel beschikbaar voor persoonlijk gebruik binnen de Innovocean site
en mag op geen enkele manier verder worden verspreid.