Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (0): add | show Print this page

Manning's roughness coefficient in SWASH: application to overtopping calculation
Suzuki, T.; Altomare, C.; De Roo, S.; Vanneste, D.; Mostaert, F. (2018). Manning's roughness coefficient in SWASH: application to overtopping calculation. Version 2.0. FHR reports, 17_026_1. Flanders Hydraulics Research: Antwerp. VIII, 36 + 17 p. app. pp.
Part of: FHR reports. Flanders Hydraulics Research: Antwerp, more

Available in  Authors 
Document type: Project report

Keywords
    Coastal protection > Coastal safety against extreme storms > Sea dikes
    Forces (mechanics) > Friction > Bottom friction
    Literature and desktop study
    Numerical modelling
    Wave processes on beaches > Wave runup
Author keywords
    SWASH

Project Top | Authors 
  • SWASH bottom friction and infiltration, more

Contact details

Proposer: Vlaamse overheid; Beleidsdomein Mobiliteit en Openbare Werken; Vlaams Ministerie van Mobiliteit en Openbare Werken; Agentschap voor Maritieme Dienstverlening en Kust; Afdeling Kust, more


Authors  Top 

Abstract
    The wave overtopping calculation method for the Safety assessment 2015 was defined in Suzuki et al. (2016). In order to get a conservative overtopping value for the safety assessment, the Manning’s roughness coefficient n in the SWASH 1D overtopping calculation was deliberately set as zero. This choice however impacts the estimation of wave overtopping over a cross shore profile which includes a foreshore having a ‘dry beach’ part in front of the dike. Normally, a sandy beach should add dissipation to wave propagation because of its roughness. Being excluded in the aforementioned methodology, this leads to an overestimation of wave overtopping. In this study, the bottom friction parameter in SWASH is further explored for overtopping calculation under a condtion with long berm (e.g. 50 m) in front of the dike.

    After the study it has been concluded that material based n value gives good estimation for wave transformation and run-up, for all the tested cases. Taking into account the fact that the Manning coefficient n for the sand and promenade material would be around 0.019, and therefore the default bottom friction value n=0.019 is recommended for overtopping calculation in SWASH.


All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors