Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (1): add | show Print this page

one publication added to basket [226214]
Radium analysis by sector field ICP-MS in combination with the Diffusive Gradients in Thin Films (DGT) technique
Leermakers, M.; Gao, Y.; Navez, J.; Poffijn, A.; Croes, K.; Baeyens, W. (2009). Radium analysis by sector field ICP-MS in combination with the Diffusive Gradients in Thin Films (DGT) technique. J. Anal. At. Spectrom. 24(8): 1115-1117. https://dx.doi.org/10.1039/B821472G
In: Journal of Analytical Atomic Spectrometry. Royal Society of Chemistry: London. ISSN 0267-9477; e-ISSN 1364-5544, more
Peer reviewed article  

Available in  Authors 

Authors  Top 
  • Poffijn, A.
  • Croes, K., more
  • Baeyens, W., more

Abstract
    A new and simple method to assess low radium concentrations in water and sediment pore water was developed. The 226Ra ions are trapped on a laboratory prepared MnO2 resin (3 other ones have also been tested) that is inserted in a DGT probe (diffusive gradients in thin films). The probe can be deployed for days to weeks sufficient to accumulate enough 226Ra to be quantified. Because the High Resolution ICP-MS was operated in low resolution mode to get the highest sensitivity, isobaric interference from the Sr88Ba138 molecular ion could not be avoided. However, the pre-concentration on the MnO2 resin favours 226Ra accumulation versus that of Ba and Sr. The instrumental repeatability on a standard of 2 ng L-1226Ra was 1.4% (n = 10), while the relative standard deviation on natural samples was 8% (average of 2.2 pg L-1226Ra, n = 3). A detection limit as low as 0.022 pg L-1226Ra (0.80 mBq L-1) was achieved for a 24 h DGT deployment.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors