Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (1): add | show Print this page

one publication added to basket [238481]
Experimental study of violent wave impact on a vertical structure with an overhanging horizontal cantilever slab
Kisacik, D.; Troch, P.; Van Bogaert, P. (2012). Experimental study of violent wave impact on a vertical structure with an overhanging horizontal cantilever slab. Ocean Eng. 49: 1-15. dx.doi.org/10.1016/j.oceaneng.2012.04.010
In: Ocean Engineering. Pergamon: Elmsford. ISSN 0029-8018; e-ISSN 1873-5258, more
Peer reviewed article  

Available in  Authors 

Author keywords
    Vertical walls; Breaking wave impact; Impact pressure and force

Authors  Top 

Abstract
    Results from wave impact tests are used to analyze the pressure distribution on a vertical structure with an overhanging horizontal cantilever slab. The structure faces two individual impacts, occurring sequentially on the vertical and horizontal parts. An expression is being proposed for the location of maximum pressures pmax (zmax) on the vertical part as a function of the wave steepness (H/L0). On the horizontal part, pmax is located at the attached corner of the structure. The relations between measured pmax on the both vertical and horizontal parts and related rise times (tr) are analyzed and new non-dimensional functions are proposed. The boundary conditions for occurring of high dynamic pressures are determined both on the vertical and horizontal part. Three different pressure distribution cases are proposed as SBW, BW and BWSAT according to the breaker type. For each breaker type, the local pressure ratio's ph3/ph1, ph1/pv1, and ph2/pv1 are analyzed, where ph1, ph2 and ph3 are the local peak pressures at the SWL and top and bottom of the vertical part respectively, whereas, pv1 is the local peak pressure on the horizontal part. Recommended profiles are calculated from local pmax values.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors