Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (1): add | show Print this page

one publication added to basket [241980]
Sensitivity of plastic response of defective pipeline girth welds to the stress-strain behavior of base and weld metal
Hertelé, S.; De Waele, W.; Denys, R.; Verstraete, M. (2013). Sensitivity of plastic response of defective pipeline girth welds to the stress-strain behavior of base and weld metal. J. Offshore Mech. Arct. Eng. 135(1): 8 pp. http://dx.doi.org/10.1115/1.4007049
In: Journal of offshore mechanics and arctic engineering. ASME: New York, NY. ISSN 0892-7219; e-ISSN 1528-896X, more
Peer reviewed article  

Available in  Authors 

Keyword
    Marine/Coastal
Author keywords
    pipeline girth weld; strain capacity; strength mismatch; crack drivingforce

Authors  Top 

Abstract
    One of the key parameters influencing the acceptability of a pipeline girth weld defect subjected to remote plastic deformation is the strength mismatch between weld and base metal. However, no single definition exists for weld strength mismatch, as it can be defined either on the basis of yield stress, ultimate tensile stress or any intermediate flow stress. To investigate the relevance of such definitions, the authors have performed a series of analyses of curved wide plate tests, using a validated parametric finite element model. The results indicate that, whereas yield stress overmatch determines crack driving force for small plastic strains, ultimate tensile stress overmatch is the more important parameter for advanced plastic strains and determines the eventual failure mode. Further, the strain capacity and exact crack driving force curve are additionally determined by uniform elongation and crack growth resistance.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors