Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (1): add | show Print this page

one publication added to basket [8522]
Wave run-up and overtopping: prototype versus scale models
De Rouck, J.; Verdonck, R.; Troch, P.; Van Damme, L.; Schlütter, F.; De Ronde, J. (1998). Wave run-up and overtopping: prototype versus scale models, in: Edge, B.L. (1999). Coastal Engineering 1998 conference proceedings June 22-26 1998 Copenhagen, Denmark. pp. 1039-1052
In: Edge, B.L. (1999). Coastal Engineering 1998 conference proceedings June 22-26 1998 Copenhagen, Denmark. Coastal Engineering Research Council of the American Society of Civil Engineers: USA. ISBN 0-784-0411-9. 3699 pp., more

Keyword
    Marine/Coastal

Authors  Top 
  • De Rouck, J., more
  • Verdonck, R.
  • Troch, P., more
  • Van Damme, L., more
  • Schlütter, F., editor
  • De Ronde, J., more

Abstract
    The determination of the crest level is one of the most important points in the design of sloping coastal structures. The crest level of sloping coastal structures is governed by wave run-up and overtopping. Recent measurement results of run-up on prototype have indicated that wave run-up may be underpredicted by scale model tests. So full scale measurements of wave run-up is necessary. At the same time the overtopping discharge on a prototype breakwater will be measured. Within the MAST III - OPTICREST project, these measurements will be carried out at coastal structures at two locations: Zeebrugge (Belgium) and Petten (The Netherlands). The results obtained from these prototype measurements will be compared with those from scale model tests and will be used to calibrate numerical models. This paper also presents the contents of the OPTICREST project.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors