Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (0): add | show Print this page

Quantitatively monitoring bubble-flow at a seep site offshore Oregon: field trials and methodological advances for parallel optical and hydroacoustical measurements
Veloso-Alarcón, M.E.; Urban, P.; Weiss, T.; Köser, K.; She, M.; Greinert, J. (2022). Quantitatively monitoring bubble-flow at a seep site offshore Oregon: field trials and methodological advances for parallel optical and hydroacoustical measurements. Front. Earth Sci. 10: 858992. https://dx.doi.org/10.3389/feart.2022.858992
In: Frontiers in Earth Science. Frontiers Media SA: Lausanne. e-ISSN 2296-6463, more
Peer reviewed article  

Available in  Authors 

Keyword
    Marine/Coastal
Author keywords
    methane seeps; bubbles; hydroacoustic quantification; GasQuant-II; optical bubble measurements; Bubble-Box; Astoria Canyon

Authors  Top 
  • Veloso-Alarcón, M.E., more
  • Urban, P., more
  • Weiss, T.
  • Köser, K.
  • She, M.
  • Greinert, J., more

Abstract
    Two lander-based devices, the Bubble-Box and GasQuant-II, were used to investigate the spatial and temporal variability and total gas flow rates of a seep area offshore Oregon, United States. The Bubble-Box is a stereo camera–equipped lander that records bubbles inside a rising corridor with 80 Hz, allowing for automated image analyses of bubble size distributions and rising speeds. GasQuant is a hydroacoustic lander using a horizontally oriented multibeam swath to record the backscatter intensity of bubble streams passing the swath plain. The experimental set up at the Astoria Canyon site at a water depth of about 500 m aimed at calibrating the hydroacoustic GasQuant data with the visual Bubble-Box data for a spatial and temporal flow rate quantification of the site. For about 90 h in total, both systems were deployed simultaneously and pressure and temperature data were recorded using a CTD as well. Detailed image analyses show a Gaussian-like bubble size distribution of bubbles with a radius of 0.6–6 mm (mean 2.5 mm, std. dev. 0.25 mm); this is very similar to other measurements reported in the literature. Rising speeds ranged from 15 to 37 cm/s between 1- and 5-mm bubble sizes and are thus, in parts, slightly faster than reported elsewhere. Bubble sizes and calculated flow rates are rather constant over time at the two monitored bubble streams. Flow rates of these individual bubble streams are in the range of 544–1,278 mm3/s. One Bubble-Box data set was used to calibrate the acoustic backscatter response of the GasQuant data, enabling us to calculate a flow rate of the ensonified seep area (∼1,700 m2) that ranged from 4.98 to 8.33 L/min (5.38 × 106 to 9.01 × 106 CH4 mol/year). Such flow rates are common for seep areas of similar size, and as such, this location is classified as a normally active seep area. For deriving these acoustically based flow rates, the detailed data pre-processing considered echogram gridding methods of the swath data and bubble responses at the respective water depth. The described method uses the inverse gas flow quantification approach and gives an in-depth example of the benefits of using acoustic and optical methods in tandem.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors