Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (0): add | show Print this page

Wave run-up on cylindrical and cone shaped foundations for offshore wind turbines
De Vos, L.; Frigaard, P.; De Rouck, J. (2007). Wave run-up on cylindrical and cone shaped foundations for offshore wind turbines. Coast. Eng. 54(1): 17-29. dx.doi.org/10.1016/j.coastaleng.2006.08.004
In: Coastal Engineering: An International Journal for Coastal, Harbour and Offshore Engineers. Elsevier: Amsterdam; Lausanne; New York; Oxford; Shannon; Tokyo. ISSN 0378-3839; e-ISSN 1872-7379, more
Peer reviewed article  

Available in  Authors 

Author keywords
    wave run-up; cylindrical monopile; conical monopile; offshore wind

Authors  Top 
  • De Vos, L., more
  • Frigaard, P.
  • De Rouck, J., more

Abstract
    During the last decade, several offshore wind-farms were built and offshore wind energy promises to be a suitable alternative to provide green energy. However, there are still some engineering challenges in placing the foundations of offshore wind turbines. For example, wave run-up and wave impacts cause unexpected damage to boat landing facilities and platforms. To assess the forces due to wave run-up, the distribution of run-up around the pile and the maximum run-up height need to be known. This article describes a physical model study of the run-up heights and run-up distribution on two shapes of foundations for offshore wind turbines, including both regular and irregular waves. The influence of wave steepness, wave height and water depth on run-up is investigated. The measured run-up values are compared with applicable theories and previous experimental studies predicting run-up on a circular pile.
    The results show that the shape of the foundation substantially affects the maximum run-up level, increasing the expected run-up value. A new relationship between the wave climate (regular and irregular waves) and the run-up is suggested. For this, the velocity stagnation head theory is adjusted and second order Stokes equations are used to calculate the wave kinematics in the crest. The variation of the run-up around the pile is measured and it is found that the position with the lowest run-up level is located under 135, while the run-up at that position amounts to approximately 40% to 50% of the maximum run-up.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors