Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (0): add | show Print this page

Comparison of the spatial and radiometric resolution of ERS and Metop C-band radars
Elyouncha, A.; Neyt, X. (2014). Comparison of the spatial and radiometric resolution of ERS and Metop C-band radars, in: Bostater, C.R. et al. (Ed.) Remote Sensing of the Ocean, Sea Ice, Coastal Waters, and Large Water Regions 2014. Proceedings of SPIE, the International Society for Optical Engineering, 9240: pp. 92400L. https://dx.doi.org/10.1117/12.2068190
In: Bostater, C.R. et al. (Ed.) (2014). Remote Sensing of the Ocean, Sea Ice, Coastal Waters, and Large Water Regions 2014. Proceedings of SPIE, the International Society for Optical Engineering, 9240. SPIE: Amsterdam. , more
In: Proceedings of SPIE, the International Society for Optical Engineering. SPIE: Bellingham, WA. ISSN 0277-786X; e-ISSN 1996-756X, more
Peer reviewed article  

Available in  Authors 

Authors  Top 

Abstract
    ERS-1/2 and Metop-A/B satellites carry a very similar radars operating at similar frequencies (5.3/5.255 GHz) and same polarization (VV). However, the radars on-board the satellites of these two missions differ in the pulse waveform, bandwidth and slightly in geometry. Moreover, the on-board and the on-ground processing is different. This paper investigates the spatial and radiometric resolution of these radars and the resolution enhancement between ERS (1991-2011) and Metop (2006- ) missions. The spatial resolution assessment implies the computation and the comparison of the Spatial Response Function (SRF) of both systems. The SRF involves mainly the antenna gain pattern, the pulse waveform and the different on-board filtering stages. The radiometric resolution depends mainly on the signal to noise ratio (SNR) and the number of averaged independent samples (N). Furthermore, the correlation of the measurement samples in a resolution cell is computed to assess the independence assumption. The metric used to quantify the radiometric accuracy in scatterometry is called Kp which is the relative standard deviation. A comparison of Kp parameter extracted from the nominal products of the two missions confirms the expected performance based on the SNR, N and correlation analysis.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors