Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (0): add | show Print this page

Capillary imbibition in cementitious materials: Effect of salts and exposure condition
De Brabandere, L.; Alderete, N.M.; De Belie, N. (2022). Capillary imbibition in cementitious materials: Effect of salts and exposure condition. Materials 15(4): 1569. https://dx.doi.org/10.3390/ma15041569
In: Materials. MDPI AG: Basel. e-ISSN 1996-1944, more
Peer reviewed article  

Available in  Authors 

Keyword
    Marine/Coastal
Author keywords
    capillary imbibition; concrete; porosity; real-life exposure

Authors  Top 
  • De Brabandere, L., more
  • Alderete, N.M., more
  • De Belie, N., more

Abstract
    Concrete structures are often exposed to harsh environmental conditions during their service life. Therefore, the investigation of transport properties and deterioration of concrete in different environments is an important topic. This paper reports the influence of salts (NaCl and Na2SO4) and exposure conditions (ideal laboratory (20 °C, 95% RH), a city and sea environment; including sheltered and exposed conditions) on capillary imbibition in cementitious materials with different water to cement ratios (0.4 and 0.6). First, the pore structure was assessed by water absorption under vacuum, torrent permeability, resistivity, and moisture content. The second part revolves around the capillary imbibition phenomenon with different imbibition liquids (water, NaCl, and Na2SO4). The results showed that, among the studied exposure conditions, sheltered conditions resulted in the largest porosity values and capillary imbibition rates (CIR). The influence of the imbibing liquid on the CIR depends on the w/c of the concrete. The CIR value for samples with a w/c of 0.4 is lower for Na2SO4 as imbibing liquid in comparison to water and NaCl. The sulfates might cause a pore blocking effect leading to a decreased CIR. For concrete with a w/c of 0.6, there was no significant difference between the different imbibition liquids. The influence of the pore blocking effect is probably smaller due to the larger porosity in this case. The findings of this research are important to understand the influence of real-life exposure conditions and therefore the influence of relative humidity, temperature, carbonation, and chloride ingress on the capillary imbibition phenomenon.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors