Skip to main content

IMIS

A new integrated search interface will become available in the next phase of marineinfo.org.
For the time being, please use IMIS to search available data

 

[ report an error in this record ]basket (0): add | show Print this page

Cockle (Anadara granosa) shells-based hydroxyapatite and its potential for defluoridation of drinking water
Mtavangu, S.G.; Mahene, W.; Machunda, R.L.; Van Der Bruggen, B.; Njau, K.N. (2022). Cockle (Anadara granosa) shells-based hydroxyapatite and its potential for defluoridation of drinking water. Results in Engineering 13: 100379. https://dx.doi.org/10.1016/j.rineng.2022.100379
In: Results in Engineering. Elsevier B.V.: Amsterdam. e-ISSN 2590-1230, more
Peer reviewed article  

Available in  Authors 

Keywords
    Anadara granosa (Linnaeus, 1758) [WoRMS]
    Marine/Coastal
Author keywords
    Cockle (Anadara granosa) shells; Hydroxyapatite; Adsorption; Defluoridation; Box-Behnken design

Authors  Top 
  • Mtavangu, S.G., more
  • Mahene, W.
  • Machunda, R.L.
  • Van Der Bruggen, B., more
  • Njau, K.N.

Abstract
    The present study describes the synthesis and characterization of a hydroxyapatite (HAp)-based adsorbent derived from biogenic cockle (Anadara granosa) shells for the defluoridation of drinking water. The raw cockle shells and synthesized HAp were characterized by X-ray fluorescence spectroscopy (XRF), attenuated total reflection-Fourier transform infrared (ATR-FTIR), X-ray diffraction (XRD), Field emission scanning electron microscopes-energy dispersive X-ray (FESEM-EDX) and Brunauer-Emmett-Teller (BET) surface area analysis. As demonstrated by FTIR, cockle shells were found to be composed of calcium carbonate (97.4%), an aragonite polymorphous type of carbonate mineral. XRD and SEM analysis supported the formation of a nanocrystalline HAp with an average crystal size of 19.08 nm and 57.1 nm, respectively, with a surface area of 105.8 m2/g and a pore size of 5.6 nm, as depicted by BET. Batch adsorption experiments were conducted using the Box-Behnken design (BBD) with five input parameters: adsorbent dose (2–10 g/L), initial fluoride concentration (10–80 mg/L), contact time (0.5–24 h), reaction temperature (303–333 K), and pH. (3–11). BBD revealed the following optimum conditions: adsorbent dose (6 g/L), initial fluoride concentration (45 mg/L), contact period 12.25 h, reaction temperature (303 K), and pH 3. Experimentally, the adsorption of fluoride on HAp fitted well with the non-linear Langmuir isotherm and linear pseudo-second order kinetics, signifying the chemisorption process. A maximum adsorption capacity (qm) of 15.374 mg/g, which is closer to the experimental value of 14.053 mg/g, was presented by the Langmuir isotherm. Thermodynamically, the adsorption process was spontaneous, endothermic, and stable in nature. The defluoridation mechanism was through electrostatic attraction, ion exchange, hydrogen bonding, and precipitation. Furthermore, the synthesized HAp and bone char were used to examine their efficacy in defluoridating field water: HAp performed better at natural pH, where the treated water met WHO and TBS standards, whereas bone char had insufficient fluoride removal, especially at high fluoride levels. As a result, this study suggests that HAp derived from Anadara granosa shells could be a viable adsorbent for the defluoridation of drinking water.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors